optoway SPM-9100VW-2RG *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 v1.0 1 SPM-9100VW-2RG (rohs compliant) 850 nm / 3 gb/s dual optical multi-mode digital diagnostic receiver ********************************************************************************************************************************************************************** features l smpte 297-2006 compliant l speed from 50 mbps to 3gbps for multi-mode fiber l support video pathological patterns for sd-sdi, hd-sdi and 3g-sdi l dual receiver with duplex lc l based on industry standard sfp l sff-8472 digital diagnostic function l single +3.3 v power supply l rohs-6 compliant l 0 to 70 o c operation l hot pluggable applications l smpte 297-2006 compliant electrical-to-optical interfaces l high-density video routers description the SPM-9100VW-2RG is a dual channel optical multi-mode receiver module designed to receive optical serial digital signals as defined in smpte 297-2006. it supports from 50 mbps to 3 gbps and is specifically designed for received the smpte 259m, smpte 344m, smpte 292m and smpte 424m sdi pathological patterns. it is with the sfp 20-pin connector to allow hot plug capability. digital diagnostic functions are available via an i 2 c. each receiver can receive signal from 50 mbps to 3 gbps with up to 1000 m of multi-mode fiber when using the spm-9100vw-2tg as the transmitter. a maximum distance of 300 m is achievable with 3gbps pathological signals. order information rx1 rx2 p/no. type bit rate (mb/s) (nm) sen. (dbm) (nm) sen. (dbm) package temp ( o c) rohs compliant SPM-9100VW-2RG 2-rx 50 to 3000 850 0 to -15 850 0 to -15 lc sfp with dmi 0 to 70 yes related products tx1 tx2 p/no. type bit rate (mb/s) (nm) power (dbm) (nm) power (dbm) package temp ( o c) rohs compliant spm-9100vw-2tg 2-tx 50 to 3000 850 -2 to -7 850 -2 to -7 lc sfp with dmi 0 to 70 yes link distance transmitter receiver sdi bit rate max. link distance (m) 3g-sdi 2.97gbps 300 hd-sdi 1.485gbps 500 spm-9100vw-2tg SPM-9100VW-2RG sd-sdi 270mbos 1,000
optoway SPM-9100VW-2RG *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 v1.0 2 absolute maximum ratings exposure to absolute maximum rating conditions for extended periods may affect device reliability. absolute maximum ratings parameter symbol min max units notes storage temperature tstg -40 85 o c operating case temperature tc 0 70 o c power supply voltage vcc 0 4 v esd tolerance on all pins 1 kv hbm relative humidity --- 5 95 % rh non-condensing recommended operating conditions parameter symbol min typ max units / notes power supply voltage vcc 3.13 3.3 3.47 v operating case temperature tc 0 70 o c baud rate 50 3000 mb/s power supply current icc 150 200 ma receiver specifications (0 o c < tc < 70 o c, 3.13v < vcc < 3.47v) parameter symbol min typ max units notes optical wavelength of operation 780 850 880 nm 0 --- -15 dbm pathological sensitivity for smpte 424m 2.97 gb/s sen 0 -15 dbm prbs 2 23 -1, ber=1e-12 0 --- -16 dbm pathological sensitivity for smpte 292m 1.485 gb/s sen 0 -16 dbm prbs 2 23 -1, ber=1e-12 signal detect -- asserted pa --- --- -16 dbm transition: low to high signal detect -- deasserted pd -26 --- --- dbm transition: high to low signal detect -- hysteresis 1 6 db electrical cml output (differential) 550 660 850 mvp-p ac coupled output 135 ps 1, smpte 424m 270 ps 1, smpte 292m 800 ps 1, smpte 344m optical rise time / fall time tr / tf 1.5 ns 1, smpte 259m output los voltage -- low v ol 0 0.5 v i ol =-1.6ma, 1 ttl unit load output los voltage -- high v oh 2.5 vcc+0.3 v i oh =40 m a, 1 ttl unit load v oh 2.5 vcc+0.3 v scl, sda v ol 0 0.5 v 1. 20% to 80%, unfiltered. module definition module definition pin 5 pin 6 interpretation by host 4 scl sda serial module definition protocol module definition 4 specifies a serial definition protocol. for this definition, upon power up, scl and sda appear as no connector (nc). when the host system detects this condition, it activates the serial protocol. the protocol uses the 2-wire serial cmos e 2 prom protocol of the atmel at24c01a/02/04 family of components.
optoway SPM-9100VW-2RG *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 v1.0 3 connection diagram pin name function notes 1 vee signal ground 2 rx2- negative differential output (2) 3 rx2+ positive differential output (2) 4 vee signal ground 5 scl serial i 2 c clock 6 sda serial i 2 c data 7 vee signal ground 8 nc no connection 9 nc no connection 10 nc no connection 11 vee signal ground 12 rx1- negative differential output (1) 13 rx1+ positive differential output (1) 14 vee signal ground 15 vcc rx1 power supply (1) 16 vcc rx2 power supply (2) +3.3v 5%, internal connected 17 vee signal ground 18 nc no connection 19 nc no connection 20 nc no connection
optoway SPM-9100VW-2RG *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 v1.0 4 recommended circuit schematic 100nf vee 100 differential 100 differential rx1 - rx1 + vcc_rx2 vcc_rx1 rx2 + rx2 - nc nc 20 18 19 16 15 8 9 17 vcc 3.3v 10 nc scl sda 4.7k 5 6 nc nc nc vee vee vee vee vee 14 2 4 1 12 3 11 7 13 10uf 1uh 100nf 10uf 1uh 100nf 10uf 4.7k rd - rd + re-clocker i2c data i2c clk rd + rd - re-clocker vcc 3.3v 1. consult chipset manufacturer s data sheet and application data for appropriate receiver input biasing network. package diagram ( units in mm) note: specifications subject to change without notice.
optoway SPM-9100VW-2RG *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 11/1/2008 v1.0 5 revision history version subject release date 1.0 initial datasheet 2008/11/1
|
